Connecting External Devices 13
Tip: When you connect a CD drive, you can also print photos from Picture CDs that you get
from your photo lab.
When you connect a digital camera or storage device, the printer treats it like a memory card.
Follow these steps to connect it:
1. Remove any memory cards from the printer.
If you leave a card in the printer, images will be read from the card instead of your camera
or storage device.
2. Connect the USB cable from your camera or storage device to the
EXT I/F USB port on
the front of the printer. Some digital cameras require a special USB cable; if so, be sure to
use the one that came with the camera.
3. Turn on the printer and your camera or storage device.
After a moment, the printer reads and counts the number of images. When it’s done, your
images are available for printing (see page 17).
Note: If you used the Stylus Photo R340 to back up your images on a Zip disk, CD, or another
storage device (see page 14), they’re stored in folders (001, 002, etc.). Use the u and d
buttons on the printer’s control panel to highlight the folder you want to open, then press
OK
to open it.
Pbasics.book Page 13 Monday, August 1, 2005 12:31 PM
To Next Page
Loading...
