28 Printing Without a Computer
3. If you are adjusting up and down, press d to move the image down, or u to move it up.
Then press the
OK button. You can adjust the position by up to 2 mm in either direction.
If you are adjusting left and right, press l to move the image left, or r to move it right.
Then press the
OK button. You can adjust the position by up to 2 mm in either direction.
4. Press the
OK button to set the changes you made and return to the Setup menu.
Note: The printer remembers this setting even after it has been turned off, so you don’t
need to adjust the position each time you use the CD/DVD function.
Resetting Default Settings
You can reset the printer’s settings (such as the layout, color effects, or crop settings) to the
default settings before printing other photos.
1. Press the
Setup button.
2. Press u to choose
Restore Factory Settings.
3. Press r.
4. Press
OK.
5. Press the
Setup button to exit the Setup menu.
Note: Not all settings are returned to their defaults using the Restore to Factory Settings
feature.
Pbasics.book Page 28 Monday, August 1, 2005 12:31 PM
To Next Page
Loading...
