44 Printing From Your Computer
7. After the first pattern is printed, adjust the setting, then repeat steps 3 through 6,
selecting
Second or Second Time to print the second pattern.
Note: You can print three density patterns on one disc. Each pattern is printed in a
different location.
8. If you want to try a third Color Correction setting, you can repeat steps 3 through 6 again
and select
Third or Third Time.
9. Remove the CD or DVD and let it dry for at least 24 hours. Then check the saturation
levels again.
You can also use the Brightness and Contrast settings in EPSON Print CD to adjust color
saturation. See the EPSON Print CD on-screen help for instructions.
Pbasics.book Page 44 Monday, August 1, 2005 12:31 PM
To Next Page
Loading...
