Epson Stylus Photo R800 - Tools to be Used

EPSON Stylus Photo R800 Revision A
DISASSEMBLY & ASSEMBLY Overview 74
4.1.2 Tools to Be Used
The following table indicates the tools recommended for use for disassembly,
reassembly and adjustment.
.
{: Available in the market
C A U T I O N
 When the printer model uses the HAV Ink Cartridges,
transport it after removing the Ink Cartridges. Especially
for air transportation, always remove the Ink Cartridges
before transportation since ink will flow into the Cap Unit
via the Print Head with the reduction of the atmospheric
pressure, causing ink leakage.
 Use only the recommended tools for disassembly,
reassembly and adjustment. (Refer to Table 4-1"Tool
List".)
 Tighten screws to the specified torques.
 Use the specified lubricants and adhesives.
Make the necessary adjustments under the instructions
given for disassembling.
(Refer to Chapter 5 "Adjustment".)
Table 4-1. Tool List
Tool Name Supplier Code
Phillips Screw Driver (No.1) { 1080530
Phillips Screw Driver (No.2) { 1080532
Standard Screwdriver { 1080527
Tweezers { 1080561
Needle nose pliers { 1080564
Acetate Tape { 1003963
Sonic Tension Meter { 1231678
Download Service Manual And Resetter Printer at http://printer1.blogspot.com