Epson Stylus Photo R800 - PG Setting

EPSON Stylus Photo R800 Revision A
PRODUCT DESCRIPTION PG Setting 10
1.2 PG Setting
As this printer uses an Auto PG (APG), an appropriate PG position is set according to the used paper type.
The following table indicates the PG positions, the main applications of each position, and the relationships between the two sensors used with the APG.
Table 1-1.
Application
PG Position
PG (-) PG (0) PG (+) PG (++) Release
Printing • Special thick paper • Plain paper
• Special thin paper
• PG(-) rub avoidance
• Envelope
• PG(0) rub avoidance
• CD-R/Board paper
–
Non-printing
–
• Standby position
after power-on (For
bottom stacker)
–
• Initialization at
power-on
• Cleaning (wiping)
• Waiting for CD-R/
Board paper to be
fed
• Paper jam removal
PG value 1.2mm 1.7mm 2.1mm 4.5mm –
Sensor PG (-) PG (Typ.) PG (+) PG (++) Release
APG Sensor 1 OFF OFF OFF OFF OFF
APG Sensor 2 ON ON ON OFF OFF
Download Service Manual And Resetter Printer at http://printer1.blogspot.com