Epson Stylus Photo RX600 - Scanner Unit Removal

EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Main Unit Removal 42
4.2.2 Scanner Unit Removal
1. Panel Unit Removal. (p41)
2. Remove one screw that secures the FFC cover.
3. Remove the FFC cover from the middle housing.
4. Remove a TPU cable and a Grounding cable from the printer unit.
5. Remove all main board connectors.
6. Remove ferrite core from the middle housing.
7. Remove two hinge screws that secure the middle housing.
8. Remove the scanner unit upward easily.
Figure 4-2. Scanner Unit Removal
C.B.P.Tite 3x8,F/ZN
Tightening torque:0.6 ± 0.1 N
⋅m
Grounding cable
Scanner Unit
C.B.P Tite 3x8,F/ZN
Tightening torque
:0.6 ± 0.1 N
⋅m
FFC Cover
Scanner FFC
Ferrite Core