4-103
Maintaining and Transporting the Printer | 103
3. Raise the ink levers to the unlocked position.
4. Remove the empty ink cartridge from the printer. Make sure you save
your first set of empty 110 ml cartridges, so you can use them for
transporting the printer if necessary.
5. Make sure the replacement cartridge is the correct color, and remove it
from its package.
6. Gently shake the cartridge before installing it.
WARNING: Do not shake
the empty cartridge, or ink
may leak out. If ink gets on
your hands, wash them
thoroughly with soap
and water. If ink gets in
your eyes, flush them
immediately with water.
sp4000Guide.book Page 103 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
