1-27
Handling Paper and Other Media | 27
Using the Front Manual Feed Slot
If you want to print on fine art paper, posterboard, or other media
19 to 59 mil (0.5 to 1.5 mm) thick, you need to use the manual feed slot.
This provides a straight-through paper path. Be sure to allow enough room
behind the printer so the paper is not bent when it feeds into printing
position.
1. Make sure the printer is turned on, then press the Paper Source
button until the sheet icon
appears on the LCD display.
2. Release the paper lever.
3. Open the top cover.
sp4000Guide.book Page 27 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
