Epson Stylus Pro 4000 - Checking Ink Levels

2-55
Printing with EPSON Drivers for Macintosh | 55
You see a screen like this:
3. From here you can monitor the progress of your print job or do one of
the following:
• Click the print job, then click Delete to cancel the job
• Click the print job, then click Hold to pause printing
• Click a print job marked “Hold” and click Resume to resume
printing
• If Multiple print jobs are listed, click a print job, then click the
Priority arrow as necessary to reorder the jobs
4. When you’re finished, close the print job window, then close Print
Center/Printer Setup Utility.
Checking Ink Levels
The EPSON Printer Utility lets you check the levels of ink in the printer.
You can also run maintenance utilities from this screen. See pages 96 to 97
for instructions.
1. Double-click the Applications folder on your hard drive.
2. Double-click EPSON Printer Utility.
sp4000Guide.book Page 55 Friday, October 22, 2004 5:06 PM