1-24
24 | Handling Paper and Other Media
7. Load the sheets with the printable side down, in the portrait orientation
(short edge first). Place the paper all the way back in the paper tray and
next to the right edge.
Make sure the stack of paper fits under the arrow on the left edge guide.
8. Adjust the edge guide and length of the paper tray.
Note: When you need to
add sheets, first remove
all the paper and then add
to the stack that you
removed.
sp4000Guide.book Page 24 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
