2-64
64 | Printing with EPSON Drivers for Macintosh
5. Set the Mode option as follows:
• Click Automatic to have the printer driver analyze the contents of
your image or file and make the appropriate printing adjustments. If
a
Quality/Speed slider appears in the Mode box, set it to Quality
for higher resolution prints.
• Click PhotoEnhance to have the driver automatically adjust the
contrast, saturation, and brightness. You can also select automatic
enhancements or filters for
People, Nature, Soft Focus, Sepia or
Digital Camera Correction.
• Click Custom and then choose one of the following settings, or
click the
Advanced button and see page 65 for more information.
The two
Advanced Photo settings let you print at either 1440 dpi
(
Advanced Photo) or 2880 dpi, the highest resolutions available.
The
Text/Graph setting intensifies colors and lightens the midtones
and highlights for non-photographic output.
The
ColorSync setting applies color management based on the
printer’s ICC profile, using the perceptual rendering intent.
6. Choose from the following buttons to access additional features:
• Click to access the printer monitoring and maintenance utilities.
See page 70 for more information about the Status Monitor utility.
See Chapter 4 for details about the maintenance utilities.
• Click if you want to reduce your image to fit the page or for
other layout options.
• Click to turn on background printing. This lets you work on
your Macintosh while you’re printing and use the Monitor IV
utility. See page 68 for more information.
• Click to check your ink levels.
• Click and then click the Preview button to preview your print.
7. When you’re finished choosing print options, click
Print. You can also
select
Save File or Preview.
sp4000Guide.book Page 64 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
