2-66
66 | Printing with EPSON Drivers for Macintosh
5. Choose any of the following:
• MicroWeave or Super MicroWeave to eliminate unwanted
banding effects. If you notice banding with the standard
MicroWeave setting, select Super MicroWeave (if available).
• High Speed for fast, bidirectional printing at lower quality.
• Flip Horizontal for printing a mirror image of your file. Use with
backlight film.
•Finest Detail for sharper edges when printing text, graphics, and
line art.
• Edge Smoothing to improve the quality of low-resolution images.
6. Choose one of the following Color Management settings:
• Color Controls lets you specify individual values for adjusting
brightness, contrast, saturation, and CMY inks, or choose from the
three Color Adjustment modes. You can also choose from three
Gamma settings.
• PhotoEnhance4 allows you to correct noise and other problems
common to digital camera images or choose special tone and effect
settings.
• ColorSync lets you select from three Rendering Intent settings for
mapping colors to your printer’s
EPSON Standard profile. In most
cases, you will get better results by applying color management in
your application, rather than in the printer driver.
• No Color Adjustment
Disables color management in the printer driver. Choose this mode
when you use a color managed workflow in Photoshop or other
software applications.
Tip: If you turn off color
management, you can
use the Color Density
setting to control the
ink density. Click the
Paper Config button.
sp4000Guide.book Page 66 Friday, October 22, 2004 5:06 PM
To Next Page
Loading...
