5
Continue
▲
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace
it before you start. Or you can wait until the ink runs
out, replace the cartridge, and then continue the job.
Checking Ink Levels
The easiest way to check ink levels is from the
control panel.
Replacing Ink Cartridges
When the ink light flashes, one of the indicators is
low, and INK LOW is displayed on the LCD panel, the
corresponding cartridge is nearly expended. Make sure
you have the correct replacement cartridge.
You can install any combination of 110 ml and 220 ml
cartridges.
Epson UltraChrome K3
TM
withVivid Magenta ink
110 ml 220 ml
Photo Black T605100 T606100
Cyan T605200 T606200
Vivid Magenta T605300 T606300
Yellow T605400 T606400
Light Cyan T605500 T606500
Vivid Light Magenta T605600 T606600
Light Black T605700 T606700
Light Light Black T605900 T606900
Matte Black T613800 T614800
When one of the indicators is blank and REPLACE
INK CRTG is displayed on the LCD panel, the cartridge
is expended. To replace the cartridge, first make sure the
printer is on.
1 Press the ink compartment cover to open it.
2 Raise the ink lever to the unlocked position.
3 Remove the expended ink cartridge from the printer.
Warning: Do not shake the expended cartridge, or
ink may leak. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
4 Make sure the replacement cartridge is the correct
color, and remove it from its package.
Gently shake the cartridge before installing it.
3 Vivid Magenta 5 Light Black
(full)
(empty)
1 Photo Black/
Matte Black
2 Cyan
4 Yellow
6 Light Cyan
7 Vivid Light Magenta
8 Light Light Black
To Next Page
Loading...
