132
132 | Maintaining and Transporting the Printer
Printing Status Information
The status check sheet shows some of the current default settings, the
amount of ink remaining in each cartridge, the page count, and the status of
various printer parts.
1. Make sure paper is loaded in the printer.
2. Press the
Menu button.
3. Press the d button to highlight
TEST PRINT, then press Menu.
4. Press d to highlight
STATUS SHEET, then press Menu. You see
PRINT.
5. Press to start printing.
The amount of ink left or the maintenance tank capacity is indicated as
follows:
E[*****]F = 100–81% of ink or maintenance tank capacity remaining
E[**** ]F = 80–61%
E[*** ]F = 60–41%
E[** ]F = 40–21%
E[* ]F = 20–11%
% = less than 10% of ink or maintenance tank capacity remaining
Viewing Status Information
1. Press the Menu button.
2. Press the d button until
PRINTER STATUS is highlighted, then press
Menu.
3. Do one of the following:
• To check the firmware version, press Menu again. When done,
press the l button.
• To check the number of pages that can be printed with each ink
cartridge, press d to highlight
PRINTABLE PAGES, then press
Menu. Press d to view the number of pages remaining for each
cartridge. When done, press l.
Note: You can replace
the ink cartridges, cutter
blade, and maintenance
tank yourself. Other
printer parts need to
be replaced by an
authorized Epson service
technician.
To Next Page
Loading...
