195
Installing and Using Optional Equipment | 195
7. Press the d button to feed the paper forward and create some slack.
8. Hold the
Manual switch on the Auto Take-Up Reel in the Forward
position to take up at least one turn of paper onto the reel. Make sure
adequate slack remains between the roll paper and the take-up reel.
Taking-up Paper Backward
When you want the paper wound onto the take-up reel with the print on the
inside, set the take-up reel to wind paper backward, as described below.
1. Attach the three paper guides that came with the Auto Take-Up Reel,
making sure to space them evenly.
2. Make sure that the roll paper is loaded in the printer properly. For
instructions, see page 55.
To Next Page
Loading...
