202
202 | Control Panel Summary
d Paper Feed Down Feeds the paper forward
Changes setting parameters within menu mode
u Paper Feed Up Feeds the paper backward, if you fed it forward using
the d Paper Feed Down button (does not feed paper
backward if you fed it forward by hand)
Changes setting parameters within menu mode
Enter Executes setting changes within the menu system
When held for 3 seconds when sheet is selected,
ejects the sheet
When held for 3 seconds when roll/Auto Cut On is
selected, cuts the paper automatically
When held for 3 seconds when roll/Auto Cut Off is
selected, feeds roll paper (for use with optional Manual
Media Cutting System, if installed)
When held for 3 seconds when the printer is drying ink,
stops the ink drying process and ejects the paper
Button combinations
P Power + Pause When the printer is already turned on, enters
maintenance mode
Pause +
l Paper Source
Switches the roll paper counter on and off (if
REMAINING PPR SETUP and ROLL PAPER COUNTER
settings are on; see page 149 for details)
Button Description
To Next Page
Loading...
