Epson Stylus Pro GS6000 - Page 33

EPSON Stylus Pro GS6000 User’s Guide
Handling Paper
33
C
Set the roll paper to the roll paper holder
(Left).
D
Set the roll paper to the roll paper holder
(Right), and then fix the fixing lever.
E
Loosen the fixing levers of the right and left
roll paper holders, move the roll paper to
the center (d mark shows the center
position) and tighten the levers.
Note:
Set the roll paper as shown below depending on
the type of roll paper.
❏ Type: Coating side face-up
❏ Type: Coating side face-in
Note:
Fix the roll paper holders by pressing the
holders to the printer.