Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000 User’s Guide
Safety Instructions
8
Handling ink cartridges
Observe the following when handling the ink
cartridges:
❏ Keep ink cartridges out of the reach of
children. Do not allow children to drink from
or handle the cartridges.
❏ Shake an ink cartridge horizontally well
(about 5 seconds) before installing it for best
results.
❏ Be careful when you handle used ink
cartridges, as there may be some ink
remaining around the ink supply port. If ink
gets on your skin, wash the area thoroughly
with soap and water. If ink gets into your
eyes, flush them immediately with water. If
discomfort or vision problems remain after a
thorough flushing, see a doctor immediately.
❏ Use the ink cartridge before the date printed
on its package.
❏ Do not dismantle ink cartridges or try to refill
them. This could damage the print head.
❏ After bringing an ink cartridge inside from a
cold storage site, allow it to warm up at room
temperature for at least three hours before
using it.
❏ Do not touch the green IC chip on the side of
the cartridge. Doing so may prevent normal
operation and printing.
❏ The IC chip on this ink cartridge retains a
variety of cartridge related-information such
as the ink cartridge status, so that the
cartridge may be removed and reinserted
freely.
❏ If you remove an ink cartridge for later use,
protect the ink supply area from dirt and
dust, and store it in the same environment as
the printer. A valve in the ink supply port
makes covers or plugs unnecessary, but the
ink may stain items that come into contact
with this area of the cartridge. Do not touch
the ink supply port or the surrounding area.
Transporting printer
❏ When transporting the printer, consult your
Epson dealer.
c
Caution:
Do not shake cartridges (that have been
installed previously) with too much force.

Epson Stylus Pro GS6000 Specifications

General

Color	Yes
Maximum resolution	1440 x 1440 DPI
Print head nozzles	360 x 8
Number of print cartridges	8
Cut sheets	No
Maximum print size	-
Maximum roll diameter	170 mm
Paper tray media types	Banner, Glossy paper
Display	LCD
Country of origin	Japan
Sound pressure level (printing)	70 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000Base-T(X) Mbit/s
Ethernet interface type	Gigabit Ethernet
Compatible operating systems	Windows Vista/XP, Macintosh 10.5.x
Minimum system requirements	2.8 GHz Intel Core 2 Duo, 4GB RAM
Power requirements	AC 100 –240 V, 50 – 60 Hz
Power consumption (active)	680 W
Power consumption (standby)	48 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	40 - 50 %
Package depth	2960 mm
Package width	1160 mm
Package height	1225 mm
Package weight	435093 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Size (imperial)	64 \
Dimensions (WxDxH)	2698 x 943 x 1267 mm