Epson Stylus Pro GS6000 - Printer Cleaning Procedures

EPSON Stylus Pro GS6000 User’s Guide
Maintenance and Move or Transportation
60
H
Install the new flushing pad. Set the
flushing pad until it clicks into place.
I
Close the right maintenance cover firmly
until it is locked.
Regular Maintenance
Cleaning the cleaning wiper
Clean the cleaning wiper once a month, or when
blurs or lacking parts appear on printed paper
after head cleaning.
A
Turn on the printer.
B
Press the button to enter the Menu
mode.
C
Press the / button to display
MAINTENANCE, and then press the button.
D
Press the / button to display
CARRIAGE MAINTENANCE, and then press the
button.
Note:
❏ Use the cleaning stick that comes with the
printer to clean the cleaning wiper.
See “Maintenance Kit” on page 53
❏ When cleaning the cleaning wiper, the print
head cap must be removed and cleaning must be
complete before the head dries. We recommend
finishing the cleaning within 15 minutes to
prevent the head from drying.