Epson Stylus Pro GS6000 - Cleaning Inside of the Printer

EPSON Stylus Pro GS6000 User’s Guide
Maintenance and Move or Transportation
69
Cleaning inside of the printer
A
Make sure the printer is turned off and all
the lights are off, and then unplug the
power cord from the electrical outlet.
B
Leave the printer for a minute.
C
Open the front cover.
D
Remove paper powder and dust attached to
the pressurizing rollers using a soft brush.
E
Apply a damp and tightly squeezed soft
cloth to wipe out paper powder and ink
attached to the platen and paper guide.
F
Apply a damp and tightly squeezed soft
cloth to wipe off the dirt of the unpainted
(silver color) area in the center of the grid
roller.
Note:
Do not blow paper powder inside the printer
using tools such as an air duster. It may cause
an abnormal noise from the inside of the
printer.