47
Print Quality/Layout
Problems
Drukas kvalitātes/
izkārtojuma
problēmas
Spausdinimo
kokybės / išdėstymo
problemos
Prindikvaliteedi
või -paigutuse
probleemid
Problems Solution No.
You see banding (light lines) in your printouts or copies.
ABCDFH
Your printout is blurry or smeared.
ABCDEG
Your printout is faint or has gaps.
ABCF
Your printout is grainy.
D
You see incorrect or missing colors.
CF
The image size or position is incorrect.
AIJK
Solutions
A
Make sure you selected the correct paper setting for the loaded paper. R & 12
B
Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction. R & 14
C
Clean the print head. R & 30
D
Align the print head. R & 32
If quality is not improved, try aligning using the printer driver utility. See your online User’s Guide to align the print head.
E
To clean the inside of the printer, make a copy without placing a document on the document table. For further information,
see your online User’s Guide.
F
Use up ink cartridge within six months of opening vacuum package. R & 40
G
Try to use genuine Epson ink cartridges and paper recommended by Epson.
H
If a moiré (cross-hatch) pattern appears on your copy, change the zoom setting or shift the position of your original.
R & 18, 21
I
Make sure you loaded paper and placed the original correctly. R & 14, 18
J
If the edges of the copy or photo are cropped o, move the original slightly away from the corner. R & 18
K
Clean the document table. See your online User’s Guide.
EN
Try the following solutions in order from the Top. For further information, see your online User’s Guide.
To Next Page
Loading...
Need help?
General
