LCD screen message Condition/solution
Maintenance Request A part used in the printer is nearing the end of its service life. Contact Epson
for support and provide them with the displayed maintenance request code.
Replace Part
The error remains until you replace the requested part.
Soon/Replace Part Now
(maintenance request
code)
Call For Service A call for service occurs when:
(service code) • The power cable is not connected securely
Power off and then on. If • An error occurs that cannot be cleared
this doesn't work, note
When a call for service has occurred, the printer automatically stops printing.
the code and call for
Turn off the printer, disconnect the power cable from both the outlet and the
service.
printer, and then reconnect them. Turn the printer on and off several times. If
the same call for service is displayed on the LCD screen, contact Epson for
support and provide them with the service code shown on the LCD screen.
Status Icons
Icons Description
Waste ink bottle status The waste ink bottle status is indicated as follows:
The height of the indicator corresponds to the remaining capacity.
The waste ink bottle is almost full. Make sure you have a new waste
ink bottle ready.
The waste ink bottle is full. Replace the waste ink bottle with a new
one.
142
To Next Page
Loading...
Need help?
General
