TM-H6000II User’s Manual 7
English
Cleaning the Print Head
CAUTION:
After printing, the print head can be very hot. Be careful not to touch it.
Also let it cool before you clean it. Do not damage the print head by
touching it with your fingers or any hard object.
Open the paper roll cover, and clean the thermal element (the green
part) of the print head with a cotton swab moistened with an
alcohol solvent (ethanol, methanol, or IPA).
Clean the thermal head periodically (generally every 3 months) to
maintain receipt print quality.
.
MICR and Endorsement Printing
(Factory installed options)
Reading MICR Characters On Personal Checks
CAUTION:
Do not insert checks with staples in them. This may cause paper jams,
MICR reading errors, and damage to the MICR head.
Be sure the checks are flat, without curls, folds, or wrinkles.
H62u.bookPage7Tuesday,December25,20011:15PM
To Next Page
Loading...
Need help?
General