Epson tm-m30 - Page 20

20
Chapter 2 Installation
2
5
The "Basic Information" screen appears. Click [TCP/IP] under [Configuration].
6
The "TCP/IP-IPv4 Address" screen appears. Configure the network settings. 
When finished, click the [Send] button.
Item Description
Acquiring the IP Address Select [Manual].
IP Address Set the IP Address.
Subnet Mask Set the Subnet Mask.
Default Gateway Set the Default Gateway.
Set Using Automatic Private 
IP Addressing (APIPA)
Select [Disable].
Set IP Address Using ARP + Ping Select [Disable].
IP Address Printing Select [Disable].