9
Tuning on/off the Product
To turn on the product, press the power button on the front side of the product.
To turn off the product, press the power button for 3 seconds or more until
(Power) LED
goes off.
CAUTION:
When turning off the product, make sure the AC cable is connected to the product and a wall socket,
and always use the power button.
Installing and Replacing the Roll Paper
Note:
Be sure to use the specified roll paper.
1. Put your finger under the left side of the roll paper cover and pull it up to open it.
2. Remove the used roll paper core, if there is one, and insert the roll paper in the correct
direction.
To Next Page
Loading...
