To Next PageTo Next PageHow to fix abnormal scanned data on Epson Scanner?
Abnormal scanned data or magnetic ink character reading results on your Epson Scanner can be caused by a dirty scanner glass or a dirty MICR head. When the scanned data is not normal, clean the glass of scanner. When the magnetic ink characters cannot be read normally, clean the MICR head.
How to fix faint printouts on Epson Scanner?
Faint printouts on your Epson Scanner can be due to a dirty print head or thermal head. If printing on cut sheet paper is faint, clean the print head. If printing on roll paper is faint, clean the thermal head.
What to do if paper or ID card is jammed in Epson Scanner?
If the roll paper is jammed, turn off the Epson Scanner, put your finger under the left side of the roll paper cover and pull it up to open it. Depending on where the paper is jammed, open the MICR cover, rear cover, or scanner cover, and remove the jammed paper. If an ID card is jammed, pull the scanner cover open lever and open the scanner cover by pulling it outward.
General
