Epson TM-S9000MJ - Product Specifications

32
Product Specifications
Autocutter Cutting method Scissors type with separated blades
Cutting type Partial cut (cutting with one point left edge left uncut)
ASF paper supply Number of sheets that can be loaded: 100 sheets or fewer
(when the paper thickness is 0.13 mm or less).
However, the
total thickness must be 13 mm or less including warps.
Pocket storage One-pocket
model
100 sheets or fewer (when the paper thickness is 0.13 mm or
less). However, the total thickness must be 13 mm or less
including warps.
Two-pocket
model
Main pocket: 100 sheets or fewer (when the paper thickness is
0.13 mm or less).
However, the total thickness must be 13 mm
or less including warps.
Sub pocket: 50 sheets or fewer (when the paper thickness is
0.13 mm or less). However, the total thickness must be 6.5 mm
or less including warps.
MICR reader Reading method Permanent magnetic bias
Supported fonts E13B, CMC7 (Alphabetic characters are not supported.)
Recognition rate 99% or more (at 25C {77F} using check paper conforming to
ANSI standards)
OCR/ barcode
reader
Supported OCR
fonts
E13B, CMC7
OCR A
OCR B (The characters, %, /, and & are available by driver
setting.)
Supported
barcode fonts
UPC-A, UPC-E, Code39, Code128, ITF, JAN8(EAN),
JAN13(EAN)