Epson TM-S9000MJ - MSR (Factory Option)

38
dpi: dots per inch (25.4 mm)
*
1
Binary is supported by cut sheet paper only.
*
2
The background on the check is eliminated automatically when the TM-S9000 driver binarizes grayscale image.
*
3
The TIFF format of resolution 200 dpi, binary, CCITT-Group 4 compression complies with ANSI X9.100-181-2007.
*
4
Image sensor height is 109.728 mm {4.32 in}. As the image sensor attaching portion is included, the actual obtainable height
of the image is maximum 107.358 {4.23 in}.
*
5
Maximum document width in which image can be obtained is maximum 235 mm {9.25 in} + margin to ensure image
obtainment.
MSR (Factory Option)
Cut sheet paper See "Cut sheet paper" on page 39.
ID card Type ISO/IEC7810 compliant (without embossed
effect)
Size (H  W) 53.92 to 54.18 mm {2.12 to 2.13 in}  85.47 to 85.90
mm {3.36 to 3.38 in}
Thickness 0.5 to 0.84 mm {0.02 to 2.13 in}
Warpage 2 mm maximum (ISO/IEC7810)
Recognition method Two-frequency coherent phase (F2F)
Supported magnetic format ISO 7811-6, AAMVA, previous California driver’s license
Card specifications ISO/IEC7810 compliant
Size (H W): 53.92 to 54.18 mm {2.12 to 2.13 in}  85.47 to 85.90 mm
{3.36 to 3.38 in}
Thickness: 0.76 to 0.84 mm {0.03 + 0.033 in}
Warpage: 1.5 mm {0.06 in}
Recognition rate 99.5% or more