Epson TM-S9000MJ - Selectable Functions for Processing Cut Sheet

24
Selectable Functions for Processing Cut Sheet
The TM-S9000MJ has the following functions that are selectable with the driver in accordance
with how you want to use the product with cut sheet paper. Settings with an application are also
available for the pocket ejection and processing continuance in the confirmation mode.
•Pocket ejection (on
ly for two-pocket models)
Ejects the document to the Main pocket
Ejects the document to the Sub pocket
Waterfall*
•Processing continuance
Continues processing
Ejects the document and stops processing
Stops processing without ejecting the document
• Electric endorsement
Performs electric endorsement
Does not perform electric endorsement
* When the ejection pocket is near-full, the documents are automatically ejected to the other pocket.
Processing Mode:
High-speed
mode
This mode specifies whether or not to use Pocket ejection or Processing continuance
depending on the conditions set before scanning starts.
This allows the application to operate at high speed as it does not need to specify
operations for the next document for each scan. These conditions can be judged by the
host computer (processing in the driver) or by the firmware.
Confirmation
mode
This mode specifies whether or not to use Pocket ejection or Processing continuance
depending on the instructions from the application. If there are no instructions from the
application, operations can also be performed by using the settings made beforehand.