Chapter 2 Setup
51
2
Installing the Product
Important Notes on Installation
•When carrying the product, lift the product holding the indents on both lower sides of the
product.
•Install the product horizontally.
•Make sure that the product is not subjected to any impact or vibration.
•Do not place the prod
uct near any magnetic fields to avoid decreasing the MICR recognition
rate. Especially, when you install the product near a display device, check the recognition rate
of the MICR reader.
•Leave enough space around the product to open the covers, the pocket guide, and the ASF
guide.
•To prevent a paper jam, do not prevent paper from be
ing ejected from the paper exit.
•Make sure cords and foreign objects are not caught in the product.
•Do not put any food or drink on the product case.
•Remove the cushions in the product and fixing tape before use.
To Next Page
Loading...
