Chapter 3 Application Development Information
71
3
Receipt Enhancement Information Print Mode
You can confirm the following information on the roll paper by running the R/E information
mode:
•Automatic top logo setting
•Automatic bottom logo setting
•Extended settings for automatic top/bottom logo
Starting the R/E information print mode
Follow the steps below to run this mode.
1
Install the roll paper.
2
With the roll paper cover opened, while pressing the Feed button, turn
the power on. (Keep pressing the Feed button until the Error LED lights.)
3
Press the Feed button four times.
4
Close the roll paper cover.
The printer starts printing the R/E information.
5
Turn the power off.
The printer returns to the normal mode.
To Next Page
Loading...
