How to fix abnormal scanned data on Epson Scanner?
Abnormal scanned data or magnetic ink character reading results on your Epson Scanner can be caused by a dirty scanner glass or a dirty MICR head. When the scanned data is not normal, clean the glass of scanner. When the magnetic ink characters cannot be read normally, clean the MICR head.
How to fix faint printouts on Epson Scanner?
Faint printouts on your Epson Scanner can be due to a dirty print head or thermal head. If printing on cut sheet paper is faint, clean the print head. If printing on roll paper is faint, clean the thermal head.
What to do if paper or ID card is jammed in Epson Scanner?
If the roll paper is jammed, turn off the Epson Scanner, put your finger under the left side of the roll paper cover and pull it up to open it. Depending on where the paper is jammed, open the MICR cover, rear cover, or scanner cover, and remove the jammed paper. If an ID card is jammed, pull the scanner cover open lever and open the scanner cover by pulling it outward.
Explains the manual's goal to guide operators on safe and correct product use.
Details use limitations for high-reliability applications and general operating cautions.
Defines warning and caution symbols used in the manual for user safety.
Outlines critical safety measures to prevent hazards like fire, injury, and equipment damage.
Explains the product's caution label regarding hot thermal heads after printing.
Provides essential notes for correct product usage and safe transportation procedures.
Lists URLs for downloading drivers, utilities, and manuals.
Describes the functions of the power, error, document, ID card, ink, paper LEDs, and buttons.
Provides step-by-step instructions for physically installing the product.
Guides on connecting the product to a host computer via a USB cable.
Details the process of connecting the AC adapter for power supply.
Explains how to turn the product on and off safely using the power button.
Describes the steps for opening the cover and inserting roll paper.
Provides instructions and important notes for installing and replacing the ink cartridge.
Explains how to perform test prints on roll paper and cut sheet paper.
Addresses faint printouts and suggests cleaning the print head or thermal head.
Illustrates the sequence of operations for processing cut sheet paper.
Guides on how to correctly load cut sheet paper into the Auto Sheet Feeder (ASF).
Describes how to remove processed cut sheet paper from the output pockets.
Details the procedure for scanning both sides of an ID card.
Explains how to read magnetic stripe cards using the MSR unit.
Provides instructions on how to clean the exterior of the product case.
Guides on performing print head cleaning for improved print quality.
Explains the periodic cleaning of the thermal head for print quality maintenance.
Details cleaning procedures for the MICR head to ensure accurate magnetic ink character reading.
Provides instructions for cleaning the scanner glass to maintain scanned data quality.
Lists common issues indicated by the Error LED and their resolutions.
Offers solutions for faint printouts, including cleaning the print or thermal heads.
Addresses issues with scanned data and MICR reading, suggesting cleaning the scanner or MICR head.
Explains how to resolve problems with the roll paper cover not opening due to autocutter blade lock.
Provides steps to remove jammed roll paper or cut sheet paper and ID cards.
To Next Page
General
