60
Functions
Power ON information
•Do not transmit (initial setting)
•Transmit
Auto line feed
•Always disabled (initial setting)
•Always enabled
Remote wake-up
•Enabled (initial setting)
•Disabled
Roll paper cover open during printing
•Auto recoverable error (initial setting)
• Recoverable error
Print density (roll paper)
Selectable from levels 1 to 13 (70% ~ 130%). (initial setting: level 7)
Depending on the paper type, it is recommended to set the print density as shown in the table
below to keep the print quality.
Original paper type Density level
AF50KS-E 4 (85%)
TF50KS-E, P220AGB-1 5 (90%)
P35023 6 (95%)
TF60KS-E, PD150R, PD160R, PD190R, KT48F20, KT55F20, F5041 7 (100%)
P30023, P31023 8 (105%)
When the print density setting is too dark, the printing speed tends to drop.
When the print density setting is too dark, paper dust sticks to the print head surface,
often resulting in faded print. (For how to clean the thermal head, see
"Cleaning the
Thermal Head" on page 82
.)
To Next Page
Loading...
