78
Inserting Cut Sheet Paper
You can put up to 100 sheets of cut sheet paper in the ASF to be fed automatically.
1
Pull out the ASF guide and the pocket guide appropriately for the size of
the cut sheet paper to be set.
2
Set the cut sheet paper in the ASF with the edges aligned to the paper
setting mark on the right side of the roll paper cover.
3
After setting the cut sheet paper, release it immediately.
Set the sheets with the face on which you want to print facing inside.
To scan checks or read the magnetic ink characters with MICR, set the sheets with the
part of the magnetic ink characters facing outside and down.
To set multiple sheets, align them neatly on the bottom-right (insertion side) corner.
If the sheets are inserted without being aligned, they may not be fed at all, or a paper
jam or incorrect feeding of multiple sheets may result.
Do not insert an ID card into the ID card insertion slot while processing cut sheet paper.
1234780 1234567890
1234780 123
456789
0
To Next Page
Loading...
