Epson TM-T88

5-16 Commands
GS /
m
[Name] Print downloaded bit-image
[Format] ASCII GS /
m
Hex 1D 2F
m
Decimal 29 47
m
[Range] 0 ≤
m
≤ 3, 48 ≤
m
≤ 51
[Description] Prints a downloaded bit-image using the mode specified by
m
.
m
selects a mode from the table below:
GS :
[Name] Start/end macro definition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
GS B
n
[Name] Turn white/black reverse printing mode on/off
[Format] ASCII GS B
n
Hex 1D 42
n
Decimal 29 66
n
[Range] 0 ≤
n
≤ 255
[Description] Turns on or off white/black reverse printing mode.
• When the LSB is 0, white/black reverse mode is turned off.
• When the LSB is 1, white/black reverse mode is turned on.
GS H
n
[Name] Select printing position of HRI characters
[Format] ASCII GS H
n
Hex 1D 48
n
Decimal 29 72
n
[Range] 0 ≤
n
≤ 3, 48 ≤
n
≤ 51
[Description] Selects the printing position of HRI characters when printing a bar code.
m Mode Vertical Dot Density (DPI) Horizontal Dot Density (DPI)
0, 48
1, 49
2, 50
3, 51
Normal
Double-width
Double-height
Quadruple
180
180
90
90
180
90
180
90