Epson TM-T88 User Manual

A-4 Dip Switch and Paper Near End Settings
Parallel interface specification
Set 1
Set 2
Print Density Selection
SW Function ON OFF
1-1 Auto line feed Always enabled Always disabled
1-2 Receive buffer capacity 45 bytes 4K bytes
1-3~
1-8
Undefined – –
SW Function ON OFF
2-1
Handshaking
(BUSY condition)
• Receive buffer full
• Reading data
• Off-line
• Receive buffer full
• Reading data
2-2
Reserved
(Do not change settings)
Fixed to Off
2-3
Selects print density Refer to table below
2-4
2-5~
2-7
Reserved
(Do not change settings)
Fixed to Off
2-8
I/F pin 31 reset signal
(Do not change settins)
Fixed to On
Print Density SW 2-3 SW 2-4
1 (Light) ON ON
2OFFON
3ONOFF
4 (Dark) OFF OFF

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External