Epson TM-T88 User Manual

1-2 Setting Up the Printer
Connecting the Cables and Grounding the Printer
You can connect up to four cables to the printer. They all connect to
the connector panel on the back of the printer, which is shown
below:
Notes:
There is a caution label above the drawer kick-out connector.
Depending on the interface installed, the interface connector on
your printer may look different from the one illustrated.
Before connecting any of the cables, make sure that both the printer
and the computer are turned off.
Connecting the computer
You need an appropriate interface cable.
1. Plug the cable connector securely into the printer’s interface
connector.
2. Tighten the screws on both sides of the cable connector.
DK
DC24V
FG
FG
Power supply
Drawer kick-out
Interface
Grounding screw

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External