Epson TM-TM88V-i - Appendix; Product Specifications

125
Appendix
Appendix
Product Specifications
80 mm width paper printing 58 mm width paper printing
Printing method Thermal line printing
Cutting method Partial cut (cutting with one point in left edge left uncut)
Roll paper (single-ply) width 79.5 ± 0.5 mm (3.13 ± 0.02") 57.5 ± 0.5 mm (2.26 ± 0.02")
Interfaces USB host port  Standards: USB2.0 (High/Full/Low speed)
 No. of ports: 5 ports
 Connector: Type A x 4, Micro-USB (Type Micro-AB) x 1
USB device port  Standards: USB2.0 (High/Full/Low speed)
 No. of ports: 1 port (shared with the host port)
 Connector: Micro-AB
Serial
*1
 Flow control: XON/XOFF control or DTR/DSR control
 Baud late: Maximum 115200 bps (bps: bits per second)
 Parity: Odd, Even, None
 Connector: D-sub 9 pin (Male)
microSD card  No. of slots: 1 slot
 Connector: 
Make sure that the product power is turned off before
inserting or removing a microSD card.
Use a microSD card with wear leveling.
Ethernet 10Base-T/100Base-TX
Wireless LAN
*2
IEEE802.11b/g/n
Drawer kick  Pin: 6 pin
 Connector: Modular
(only for cash drawer or external optional buzzer)
Buffers Receive buffer 4 KB/45 bytes (selectable using DIP switch 1-2)
Downloaded buffer 12 KB (downloaded images)
NV graphics data 256 KB
Barcode/two-dimensional symbol/
printing
JAN 8 (EAN 8), JAN 13 (EAN 13),UPC-A, UPC-E,CODE 39,ITF,
CODABAR (NW-7),CODE 93,CODE 128,PDF417, QR CODE, 
MaxiCode, GS1-128, GS1 DataBar Omnidirectional, 
GS1 DataBar Truncated, GS1 DataBar Stacked, 
GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited, 
GS1 DataBar Expanded, GS1 DataBar Expanded Stacked
Power supply AC adapter,RA (Model: M266A)