How to connect an Epson wireless POS printer
http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]
Getting Initial Printer and Wireless Adapter Settings
Get the initial settings of the wireless adapter. Run the printer self test (hold down the feed button while turning on the
printer). The printer will print a list of initial settings including SSID (network ID), Mode (Ad-Hoc or Infrastructure), current
IP address (default: 192.168.192.168)
A similar test can them be done on the UB-RO2 adapter by inserting a paperclip through the small hole in the adapter for
3 seconds.
To Next Page
Loading...
Need help?
General