TITLE
TM Printer Driver
SHEET
REVISION
NO
User's Manual
1.60
NEXT
17
SHEET
16
EPSON
Printer Models Printer Fonts Sizes JP US
Japanese drivers only FontA 9.5 OK NO
-TM-H6000(Receipt) FontA DH 19 OK NO
FontA DW 9.5 OK NO
FontA DHDW 19 OK NO
FontB 6.5 OK NO
FontB DH 13.5 OK NO
FontB DW 6.5 OK NO
FontB DHDW 13.5 OK NO
Mintyo Normal 9.5 OK NO
Mintyo DH 19 OK NO
Mintyo DW 9.5 OK NO
Mintyo DHDW 19 OK NO
Japanese drivers only FontA 9 OK NO
-TM-U675 FontA DH 18 OK NO
FontA DW 9 OK NO
FontA DHDW 18 OK NO
FontB 9 OK NO
FontB DH 18 OK NO
FontB DW 9 OK NO
FontB DHDW 18 OK NO
Mintyo Normal 8 OK NO
Mintyo DH 16 OK NO
Mintyo DW 8 OK NO
Mintyo DHDW 16 OK NO
Japanese and English drivers DM-D 1st Line 7 NO OK
-DM-D10x,20x DM-D 2nd Line 7 NO OK
[Note]
- The JP and US columns above indicate whether the font is available on JP and US drivers, respectively. A "OK"
means that the font is available; an "NO" means that it is not available.
- Although the TM-L60II / J8000 driver is provided in both JP and US types, note that neither type supports the
Myocho font.
- The "[RED]" indication means that the font prints in red ink.
- Fonts used with US drivers are either "non-extended" and "extended." (Extended fonts are marked by the "Ext."
suffix in the table above.) If you are using an extended font, character codes 80H and above will print extended
characters. If you are using a non-extended font, these codes are assigned to special printer functions (as described
To Next Page
Loading...
