TITLE
TM Printer Driver
SHEET
REVISION
NO
User's Manual
1.60
NEXT
10
SHEET
9
EPSON
3.4.Print Processor
3.4.1. About print processor
When you use a counter function of DM-D10x,20x Customer Display or ControlA font of TM-U230 in
WindowsNT4.0,Windows2000, you should install a print processor for DM-D or TM. You can not display a correct time
on the DM-D and can not use a ControlA font without this print processor.
In the case of Windows95/98, print processor is installed automatically in the installation of DM-D10x,20x or TM-U230
driver.
3.4.2. Install print processor
When you execute the Dpp160e.exe file or Tpp160e.exe file, the print processor is installed. follow the Setup Wizard.
3.4.3. Set up print processor
When you use DM-D10x,20x driver in WindowsNT4.0,Windows2000, please set up the print processor as follows. If you
use it in Win95/98, you don’t need to set up.
[WindowsNT4.0]
A. Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
B. Display a [General] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
C. Select a DMPROCES in the list box of print processor.
D. Click a [OK] button.
[Windows2000]
A Select a printer driver icon in the printer window and click a [Properties]. Properties dialog is shown.
B Display a [Advanced] tag sheet and click a [Print Processor] button. Print Processor dialog is shown.
C Select a DMPROCES in the list box of print processor.
D Click a [OK] button.
E .Check [Print directly to the printer] radio button in [Advanced] page on printer propaties dialog box, and then
click [OK].
To Next Page
Loading...
Need help?
General