1–10 Setting Up the Printer
4. Insert the ribbon in the position shown in the illustration on the
next page and push the ribbon cassette until it clicks.
Note:
Make sure that the ribbon is installed between the print head
and the platen without wrinkles or creases.
5. Turn the ribbon cassette’s knob 5 or 6 times in the direction of
the arrow again, to take up any slack in the ribbon.
RECEIPT
OUT
VALIDATION
POWERERROR
FEED
RELEASE
EPSON
RECEIPT
OUT
VALIDATION
POWERERROR
FEED
RELEASE
EPSON
To Next Page
Loading...
