1–20 Setting Up the Printer
5. Replace the DIP switch cover and secure it with the screw.
Using the Power Switch Cover
WARNING:
If an accident occurs when the power switch cover is
attached, unplug the power supply cord from the outlet
immediately; otherwise the printer may be damaged.
You can use the provided power switch cover to protect the power
switch from accidental or improper operation. Attach the cover as
shown in the illustration below.
You can turn the power on or off with the switch cover attached by
inserting a pointed object (like a ball point pen) through either of
the two small holes on the switch cover.
RECEIPT
OUT
VALIDATION
POWER
ERROR
FEED
RELEASE
EPSON
To Next Page
Loading...
