Epson TM-U325D - Page 46

Reference Information 4-5
Validation paper: Normal, pressure sensitive, and
carbon copy paper
Paper size
(W × L):
135 mm × 70 mm(minimum) to 182
mm × 182 mm (maximum) (5.31” ×
2.76” to 7.17” × 7.17”)
(maximum 9 lines at 4.23 mm (.17”)
pitch)
Single-ply
paper
thickness
(without copy
paper):
0.09 mm to 0.12 mm (.0035” to .0047”)
Copy paper
thickness:
Backing
paper:
0.07 mm to 0.12 mm
(.0028” to .0047”)
Copy and
original
paper:
0.04 mm to 0.07 mm
(.0016” to .0028”)
Carbon
copy paper:
Approximately 0.035
mm (.00138”)
Total
thickness:
0.09 mm to 0.31 mm
(.0035” to .012”)
Example:
Original + 2-ply copy
Original paper: 0.04 mm (.0016”)
Carbon copy paper: 0.07 mm (.0028”) (0.035 mm (.0138”)
×
2 sheets)
Copy paper: 0.04 mm (.0016”)
Backing paper: 0.07 mm (.0028”)
Roll paper: 0.08 mm (.0031”)
Total thickness: 0.30 mm (.0118”)