Epson TM-U675 Series - Width and Height Properties

Version 3.00 Feb. 2019
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U675)
3.1.3 Width and Height Properties
The width and height properties are described below.
Settings
Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 12 127 0
JrnLineSpacing X X X
SlpLineSpacing 12 127 0
SlpLineHeight [dot] 9
RecLineHeight [dot] 9
JrnLineHeight [dot] X
SlpLineWidth [dot] 270
SlpLineWidth [dot]
(Compatible with the TM-U375)
200
RecLineWidth [dot] 225
RecLineWidth [dot]
(Compatible with the TM-U375)
200
JrnLineWidth [dot] X
RecSidewaysMaxLines 19
*3
RecSidewaysMaxLines
(Compatible with the TM-U375)
16
*3
RecSidewaysMaxChars
(When Font A is selected)
117
*3
RecSidewaysMaxChars
(When Font B is selected)
117
*3
RecLinesToPaperCut
(With an auto-cutter)
12
*1
RecLinesToPaperCut
(Without an auto-cutter)
10
*1
SlpSidewaysMaxLines 22
*2
SlpSidewaysMaxLines
(Compatible with the TM-U375)
16
*2
SlpSidewaysMaxChars 117
*3
SlpMaxLines 0
SlpMaxLines
(When selecting Validation)
8
*2
X : No settings
*1
It can be changed by the settings of the RecLineSpacing or the character height.
*2
It can be changed by the settings of the XxxLineSpacing or the XxxLineHeight.
*3
It can be changed by the settings of the font width.
When the RecLineSpacing is 0, the RecLinesToPaperCut is –1.
When the XxxLineSpacing is 0, the XxxSidewaysMaxLines is–1.