Version 3.00 Feb. 2019
17
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U675)
3.9 Printable Bitmap Types and Sizes
The TM-U675 models support the following bitmap commands. For the detail,
please refer to the Section 3 of “EPSON OPOS ADK MANUAL APPLICATION
DEVELOPMENT GUIDE POSPrinter (TM Series)”. The allowance ranges for
bitmaps are as follows.
Bitmap command type Allowance range
X (dot) y (dot) xy Download bitmap
1-2040 1-2040 <= 32768
luster bitmap 1-1024 1-1024
One-line bitmap No setting range
3.10 Maintenance Counter
The TM-U675 models feature a maintenance counter function for retaining an
operation log of the printer. The following chart
shows the available maintenance
counters for the TM-U675.
Counter number
Hexadecimal
Counter Unit Max. Value Counter
Type
0A Paper feed in number of
lines: Slip
Lines 178,956,970 Resettable
0B Number of printed
characters: Slip (front side)
Characters 715,827,882 Resettable
32 Number of auto-cutter
operations
Times 4,294,967,295 Resettable
3C Number of check paper
readings
Times 4,294,967,295 Resettable
46 Uptime of product Hours 71,582,788 Resettable
8A Paper feed in number of
lines
Lines 178,956,970 Cumulative
8B Number of printed
characters: Slip (front side)
Characters 715,827,882 Cumulative
B2 Number of auto-cutter
operations
Times 4,294,967,295 Cumulative
BC Number of check paper
readings
Times 4,294,967,295 Cumulative
C6 Uptime of product Hours 71,582,788 Cumulative
3.11 Automatic Recovery Function
The TM-U675 models feature a function for automatic recovery when the power is
turned
on again after an interruption of power. Recovery processing is performed
automatically when the printer’s power is turned on again after an interruption.