Version 3.00 Feb. 2019
3
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-U675)
Set DIP-SW2-4 (compatible mode with the TM-U375) to match the environment
of use. When the switch is set to ON, DIP-SW2-3 is settable; set to OFF fixed.
Make other settings in accordance with the settings described above.
2) Parallel Port
DIP-SW1 DIP-SW2
No. Setting No. Setting
1 OFF Recommended 1 OFF Settable
2 OFF Recommended 2 OFF Fixed at OFF
3 OFF Fixed at OFF 3 OFF Recommended
4 OFF Fixed at OFF 4 OFF Settable
5 OFF Fixed at OFF 5 OFF Fixed at OFF
6 OFF Fixed at OFF 6 OFF Fixed at OFF
7 OFF Fixed at OFF 7 OFF Fixed at OFF
8 OFF Fixed at OFF 8 ON Fixed at ON
It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is
recommended to leave them OFF.
Set DIP-SW2-4 (compatible mode with the TM-U375) to match the environment
of use. When the switch is set to ON, DIP-SW2-3 is settable; set to OFF fixed.
When parallel I/F is used with Windows 2000, Windows XP or Windows Vista,
please set Busy Condition of DIP-SW2-1 to ON (Buffer full).
Make other settings in accordance with the settings described above.
To Next Page
Loading...
