Epson TM200 User Manual (English)

Questions and Answers:

K
Kimberly SchaeferJul 29, 2025
How to troubleshoot an Epson Printer that won't turn on?
- N
  nicole68Jul 29, 2025
  If your Epson Printer isn't powering on or the POWER LED isn't lit, try these steps: 1. Check the power supply unit to ensure it's outputting 24V. 2. Check the main circuit board unit. 3. Unplug the printer, then disconnect each motor or coil connector from the main board one by one. Plug the printer back in and power it on to identify if a motor or coil is causing the issue. 4. Replace the I/F circuit board.
M
Mathew MooreAug 1, 2025
Why is my Epson TM200 not feeding paper?
- A
  Amanda MckenzieAug 2, 2025
  If your Epson thermal printer is experiencing paper feed failure: 1. Make sure the roll paper is loaded correctly. 2. Check the receipt paper feed motor. 3. Replace the main circuit board.
S
Sara PattersonAug 6, 2025
Why is my Epson TM200 Printer printing too lightly?
- A
  agomezAug 6, 2025
  If the print from your Epson Printer is too thin, particularly when printing receipts: 1. Clean the thermal print head. 2. Adjust DIP switches DSW 1-3 and 1-4 (print density selection switches). 3. Replace the thermal print head module. 4. Replace the main circuit board unit.
E
Elizabeth DavisAug 10, 2025
What to do if the ERROR LED is lit on my Epson TM200 Printer?
- C
  Carlos RoyAug 10, 2025
  If the ERROR LED is lit on your Epson Printer: 1. Ensure the cover is closed. 2. Install a new paper roll.
P
Patricia JacksonAug 15, 2025
How to fix missing dots in Epson TM200 Printer prints?
- S
  Steven MatthewsAug 15, 2025
  If your Epson Printer has missing dots in the print, especially when printing receipts: 1. Clean the thermal print head. 2. Replace the thermal print head module. 3. Replace the main circuit board unit.
E
emily57Aug 19, 2025
What causes missing or misprinted characters on my Epson TM200?
- A
  Amy WalkerAug 19, 2025
  If your Epson Printer is producing missing or misprinted characters, or experiencing font breakdown: 1. Check the DIP switch settings. 2. Replace the interface cable.
M
Matthew CurtisAug 23, 2025
How to fix uneven print concentration on my Epson TM200 Printer?
- R
  rosecindyAug 23, 2025
  If you notice uneven print concentration on your Epson Printer, especially during receipt printing: 1. Clean the thermal print head. 2. Replace the thermal print head module. 3. Replace the main circuit board.

Epson TM200 Specifications

General

Print Method	Thermal line printing
Auto Cutter	Yes
Type	Receipt printer
Print Speed	200 mm/sec
Paper Width	80 mm
Dimensions	140 x 199 x 146 mm
Power Supply	External power supply
Interfaces	USB, Serial, Ethernet