Epson VS210 - Connecting to a Computer for USB Mouse Control

3. Connect the other end to a Computer port on the projector.
1 Computer port
4. Tighten the screws on the VGA connectors.
Parent topic: Connecting to Computer Sources
Related tasks
Connecting to a Computer for Sound
Connecting to a Computer for USB Mouse Control
If you connected your computer to a Computer or USB TypeB port on the projector, you can set up the
remote control to act as a wireless mouse. This lets you control computer presentations at a distance
from your computer. To do this, connect the projector to your computer using a USB cable, if it is not
connected already.
1. Connect the USB cable to your projector's USB TypeB port.
1 USB TypeB port
2. Connect the other end to any available USB port on your computer.
25