Epson VS210 User Manual

Projector Information Display - Info Menu
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury.
81

Epson VS210 Specifications

General

Number of colors	16.78 million colors
Projection distance	0.87 - 10.5 m
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	23 - 350 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	±30 °
Aspect ratio	4:3
RS-232 ports	-
Dimensions (WxDxH)	294.6 x 228.6 x 78.7 mm
Horizontal resolution	560 lines
Connectivity technology	Wired
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Zoom capability	Yes
Focal length range	- mm
Objective focal length	16.7 mm
Lamp type	UHE
Lamp power	200 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	5000 h
DVI port	No
USB connector type	USB Type-B
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Ethernet LAN (RJ-45) ports	0
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power	1 W
Product color	Black, White
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	283 W
Power consumption (PowerSave)	234 W
Noise level	37 dB
Noise level (economic mode)	29 dB
Operating temperature (T-T)	5 - 35 °C
Cables included	VGA

Weight and Dimensions

Depth	228.6 mm
Width	294.6 mm
Height	78.7 mm
Weight	2300 g